12Cr1MoVG与15CrMoG焊后去应力退火工艺研究

我公司自主设计的发电锅炉启动疏水扩容器系统里,在节流管部件中常会应用12Cr1MoVG与15CrMoG组焊结构,由于这两种材料自身常用的PWHT工艺不同,为简化PWHT过程,本文就锅炉制造中此类管接头常用的PWHT工艺与国家标准NB/T 47015-2011推荐的PWHT工艺进行对比研究,综合实验结果和制造工艺流程情况,给出更加合适的PWHT工艺。     

Improved magnetic and electromagnetic absorption properties of xSrFe12O19/(1−x)NiFe2O4 composites

xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites (0 ≤ x ≤ 1.0) were synthesized by using a conventional solid-state synthetic route. The results show that magnetic hysteresis loops of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are similar to those of individual component ferrites, except for the 0.1SrFe₁₂O₁₉/0.9NiFe₂O₄ and 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄, suggesting that the hard/soft magnetic phases are well exchange-coupled. The saturation magnetization, coercivity, and remanent magnetization of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are increased with increasing content of SrFe₁₂O₁₉, with maximal values of 42.1 Am² kg⁻¹, 78.7 kA m⁻¹, 17.2 Am² kg⁻¹, respectively, as the content x is about 0.5. They are higher than those of the individual components, implying that interface coupling is present in the magnetic composites. The coercivity and remanent magnetization of the composites are increased initially with increasing sintering temperature and then show a downward tendency. For the component SrFe₁₂O₁₉ and NiFe₂O₄, the minimum reflection losses are −12.5 dB and −18.3 dB at match thicknesses of 2.5 mm and 2 mm, respectively. Compared with those of the component SrFe₁₂O₁₉ and NiFe₂O₄, the microwave absorption performances of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are improved remarkably, especially for the samples of x = 0.3 and x = 0.9. The minimum reflection losses values of the 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄ composite are −31.6 dB (12.7 GHz) and −20.2 dB (13 GHz), while those of the 0.9SrFe₁₂O₁₉/0.1NiFe₂O₄ composites are −23.7 dB (16.3 GHz) and −33.5 dB (15.8 GHz), as the matching thicknesses are 2.5 mm and 2 mm, respectively. Therefore, the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites could be used as potential microwave absorption materials.     

Effects of community of inquiry,learning presence and mentor presence on K-12 online learning outcomes

This study extends the community of inquiry (CoI) framework and self-regulated learning (SRL) theory through an exploration of the structural relationships among existing CoI variables, learning presence (i.e., self-efficacy and online SRL strategy) and learning outcomes in the context of K-12 online learning. To help understand the influence of K-12 mentoring – which is unique to online learning in the U.S. – mentor presence is also included. Structural equation modelling of 696 online 8th through 12th graders' survey responses and final grades showed that adding learning presence to the CoI framework helped to explain how these learners translated their online-learning perceptions into cognitive and affective learning outcomes. We also found that mentor presence significantly and positively predicted online SRL strategy, one of the two components of learning presence. Lastly, we established a connection between the CoI model and various types of learning outcomes that are indicators of K-12 online learning success – though it should be noted that important differences existed between a model based on final grades and two other outcome models. It is hoped that the processes identified in this study will be useful and relevant to K-12 online-learning institutions and educators seeking to improve their offering via a wide range of approaches.     

Flame retardant finishing of the polyester/cotton blend fabric using a cross‐linkable hydroxy‐functional organophosphorus oligomer

Blend fabrics of cotton and polyester are widely used in apparel, but high flammability becomes a major obstacle for applications of those fabrics in fire protective clothing. The objective of this research was to investigate the flame retardant finishing of a 50/50 polyester/cotton blend fabric. It was discovered previously that N,N′‐dimethyloldihydroxyethyleneurea (DMDHEU) was able to bond a hydroxy‐functional organophosphorus oligomer (HFPO) onto 50/50 nylon/cotton blend fabrics. In this research, the HFPO/DMDHEU system was applied to a 50/50 polyester/cotton twill fabric. The polyester/cotton fabric treated with 36% HFPO and 10% DMDHEU achieved char length of 165 mm after 20 laundering cycles. The laundering durability of the treated fabric was attributed to the formation of polymeric cross‐linked networks. The HFPO/DMDHEU system significantly reduced peak heat release rate (PHRR) of cotton on the treated polyester/cotton blend fabric, but its effects on polyester were marginal. HFPO/DMDHEU reduced PHRR of both nylon and cotton on the treated nylon/cotton fabric. It was also discovered that the nitrogen of DMDHEU was synergistic to enhance the flame retardant performance of HFPO on the polyester/cotton fabric.     

Surface modification of TiO2 particles with 12-hydroxy stearic acid and the effect of particle size on the mechanical and thermal properties of thermoplastic polyurethane urea elastomers

The efficient surface modification of titanium dioxide (TiO₂) particles with different sizes was first carried out with “water only method” (Appl. Surf. Sci. 2018, 447, 664–672) developed in our group using 12-hydroxy stearic acid (12-HSA) as the modifier. The 12-HSA-modified TiO₂ particles with different sizes were then used to explore their effect on the mechanical and thermal properties of a thermoplastic polyurethane urea (TPUU) elastomer with superior mechanical and thermal properties produced newly in our lab using nonsymmetric alicyclic diisocyanate and diamine. Orthogonal experimental results showed that the order of impact of each factor on the modification efficiency of TiO₂ particles was: Temperature > time > modifier content. It was found that, in the nanometer (≤100 nm) range, smaller particles were more helpful to enhance the tensile strength of the TPUU elastomer, while larger ones to increase more significantly the elongation at break. Besides, the TiO₂/polyurethane urea nanocomposites exhibited much better thermomechanical performance than the pristine TPUU elastomer, and the thermomechanical performance of the nanocomposites increased with decreasing particle size.     

Spatial agglomeration and productivity in Italy: A panel smooth transition regression approach

The paper analyses the nonlinearities in the impact of localization, diversity, urbanization and competition on firm‐level total factor productivity (TFP), using a large sample of Italian firms from 1999 to 2007. We adopt a panel smooth transition regression model, so that the TFP elasticities are free to vary smoothly across two or more extreme values. Results show that localization economies and Jacobian externalities materialize only for values of, respectively, intra‐industry agglomeration and extra‐sectoral diversity above a certain threshold. Local competition exerts a positive effect on productivity, even though the marginal impact shrinks at high levels of competition. We find instead no evidence of diseconomies of agglomeration.     

Morphology and crystallization behavior of nylon 6‐clay/neat nylon 6 bicomponent nanocomposite fibers

Nylon 6‐clay hybrid/neat nylon 6, sheath/core bicomponent nanocomposite fibers containing 4 wt % of clay in sheath section, were melt spun at different take‐up speeds. Their molecular orientation and crystalline structure were compared to those of neat nylon 6 fibers. Moreover, the morphology of the bicomponent fibers and dispersion of clay within the fibers were analyzed using scanning electron microscopy and transmission electron microscopy (TEM), respectively. Birefringence measurements showed that the orientation development in sheath part was reasonably high while core part showed negligibly low birefringence. Results of differential scanning calorimetry showed that crystallinity of bicomponent fibers was lower than that of neat nylon 6 fibers. The peaks of γ‐crystalline form were observed in the wide‐angle X‐ray diffraction of bicomponent and neat nylon 6 fibers in the whole take‐up speed, while α‐crystalline form started to appear at high speeds in bicomponent fibers. TEM micrographs revealed that the clay platelets were individually and evenly dispersed in the nylon 6 matrix. The neat nylon 6 fibers had a smooth surface while striped pattern was observed on the surface of bicomponent fibers containing clay. This was speculated to be due to thermal shrinkage of the core part after solidification of the sheath part in the spin‐line. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39996.     

Synthesis and thermal behavior of Cu/Y2W3O12 composite

Cu metal matrix composite with Y₂W₃O₁₂ as a thermal expansion compensator was fabricated by high energy ball milling followed by compaction and sintering, and its thermal properties were explored for the potential applications as heat sinks in electronic industries, high precision optics, and space structures. The volume fraction of reinforcement was varied from 40% to 70% in order to tailor the composite for the simultaneous accomplishment of low thermal expansion and high thermal conductivity. The synthesis technique was optimized by varying the parameters like milling time from 1 to 20 h and sintering temperature from 600 to 1000 °C in order to achieve densified composites. The relative density of the composites is found to be around 90% for the 10 h milled powders followed by compaction at a pressure of 700 MPa and sintering at a temperature of 1000 °C. The thermal expansion of the composites exhibits linear behavior in the temperature range 200 to 800 °C and the low coefficient of thermal expansion (CTE) is found to be for Cu–70%Y₂W₃O₁₂ composite whose value, 4.32±0.75×10⁻⁶/°C, matches with that of Si substrate. The thermal conductivities are found to increase with a decrease in the volume fraction of the reinforcement and decrease with an increase in the temperature for all the samples. The experimentally determined CTE and thermal conductivity values are found to be comparable to those predicted by the thermal expansion based Kerner and Turner model and the thermal conductivity based Maxwell model, respectively.     

双恶唑啉及环氧类扩链剂对PA6的改性效果比较

通过熔融挤出的方法分别用环氧类扩链剂和双恶唑啉类扩链剂对尼龙(PA)6进行扩链增黏,并对扩链产物的特性黏度,力学性能和加工性能等进行了测试,对比了两类扩链剂对PA6的改性效果。结果表明,当这两类扩链剂的质量分数均为0.9%时,PA6的各项性能最佳;双恶唑啉类扩链剂对PA6的改性效果比环氧类扩链剂要好。相对于纯PA6,添加质量分数为0.9%的双恶唑啉类扩链剂,可使扩链PA6的特性黏度由0.86 d L/g增加到1.57 d L/g,熔体流动速率由14.3 g/10 min降到5 g/10 min,缺口冲击强度由5.5 k J/m2增加到7.3 k J/m2,拉伸强度由54 MPa增加到65.85 MPa,断裂伸长率由130%增加到450.9%,弯曲强度由53.16 MPa增加到72.66 MPa,平衡扭矩由2.1 N·m升高到5.3 N·m。     

无卤阻燃增强高流动性尼龙6的研究

采用高流动性尼龙(PA)6为原料,制备了一系列玻璃纤维(GF)增强无卤阻燃PA6材料。考察了材料配方和挤出工艺对改性材料阻燃性能、力学性能、热性能及熔体流动速率(MFR)的影响,并对其原因进行了分析。结果表明,与普通PA6相比,高流动性PA6由于熔体黏度低、MFR高,有利于无卤阻燃剂和GF在基体材料内的混合和分散,因此在同样配方和工艺条件下,显示出更好的阻燃效果与更优的力学性能。